Beskrivelse
A combination of a HEPA 13 filter and activated carbon to trap toxic emission
Filtre P3D-R impression FDM de bureau
The P3D-R filter is designed for desktop FDM 3D printers and works with a wide range of filaments, such as ABS, PLA, PET/PETG, HIPS, Nylon and many others.
It effectively eliminates VOCs (styrene and benzene) and UFPs, which are released by some 3D printing filaments and can cause respiratory and other health problems.
P3D
P3D: The fan pushes the air through the P3D filter, which captures particles and emissions, then expels the filtered air. This can create a slight backflow of air around the edges of the filter, but most of the air follows a direct path.
It is installed outside the 3D printer enclosure, which is convenient for accessibility and maintenance purposes.
P3D-R
P3D-R: The fan draws the air through the P3DR filter before discharging it. This method reduces the risk of backflow, as all the air is drawn through the filter before being propelled.
It is designed for installation inside the housing, optimizing filtration efficiency by capturing emissions directly before they disperse into the environment.
HEPA filter & activated carbon
P3D-R filter composition
1. Nylon grille
Nylon mesh protects HEPA media to prevent any deterioration in filtration performance.
2. HEPA 13
Pleated HEPA media in grade 13 impregnated cotton, EN1822-certified, provides protection against emitted nanoparticles.
3. Cardboard frame
Cardboard structure, to reduce plastic waste, contributes to the filter’s reduced weight and specific design.
4. Activated carbon
Activated carbon mixture for VOC treatment specific to 3D printing.
5. Withdrawal tab
The tabs allow the filter to be removed from its location without the risk of touching polluted surfaces.
6. 5mm EPDM foam
EPDM foam all-round and at the front for maximum sealing of the joint.
Compact & lightweight
124x124x44 mm | 150 g
Quick-change
less than a minute
Durable efficiency
600 hours
Omtaler
Det er ingen omtaler ennå.